Frequently Asked Questions

Frequently Asked Questions

Below you will find a list of our most frequently asked questions. If you don’t find the answer you are looking for here please feel free to Contact Us where one of our customer care team is on hand to offer honest & helpful advice.

  • How do I measure my window for blinds?View moreView less
  • We recommend using a good quality steel measuring tape and taking a measurement for the width in 3 different places as well as the drop. Our full measuring guide which gives detailed step by step instructions as well as a useful video can be found here – Measuring Guide.

  • What is the difference between a 'Recess Size' and a 'Blind Size'?View moreView less
  • When you place an order for the majority of blinds on our website, we will ask you whether the measurements you've provided are a 'Recess Size' or 'Blind Size'. This information is crucial as it affects the finished size of your blind.

    A Recess Size is the internal measurements of your window reveal as illustrated in the image below. For a Recess Size, please provide us with the exact wall to wall & ceiling to sill measurements with no reductions. We will then make the appropriate reduction to ensure the blind fits perfectly within the space. The reduction size varies depending on the type of blind.

    A Blind Size is the exact size you would like the blind to be including brackets. In most instances this will apply if you are fitting your blind on the wall outside of your window recess. This is illustrated in the image below.

  • If I provide a Recess Size, what reductions will you make?View moreView less
  • We will only ever make a reduction on the width measurement provided to ensure that you are left with adequate space either side of the blind for it to operate correctly & also to give you a tiny bit of manoeuvring space for when you fit it. The size of the reduction will vary depending on the type of blind you have ordered:

    Roller Blinds 5mm
    Wood Venetian Blinds 10mm
    Vertical Blinds 5mm
    Aluminium Venetian Blinds 10mm
    Roman Blinds 10mm
    Day & Night Blinds 5mm
    Bottom Up Blinds 5mm

  • How do I measure my bay window for blinds?View moreView less
  • Measuring for a bay window can be a little confusing as you need to ensure that adequate reductions are made to allow the blinds to fit correctly in the corners of the bay where two blinds meet. To make this easier for our customers, simply provide us with measurements of all of the available space as well as the angle of the bay & we will make the reductions on your behalf to ensure the blinds fit your bay window beautifully. Simple instructions on how to measure for a bay window can be found in the video below:

  • I'm planning on fitting my blind outside of the recessView moreView less
  • This is completely down to you depending on how big or how little you would like the overlap to be. As a rule of thumb we generally advise to overlap by 10cm.

  • I have a sloping window, how do I measure for vertical blinds?View moreView less
  • Measuring for sloping vertical blinds may seem a little daunting & complicated but it's actually really easy when you know where to measure. In our step by step video guide below we show you how sloping vertical blinds work, where you should measure, how you should measure & what you should use.

  • How do I measure for your Total Blackout Casseted Blinds?View moreView less
  • In order to order a blind from our range of Total Blackout Roller Blinds, we require customers to provide us with 7 precise measurements. This may seem excessive but it is necessary to ensure that this product is suitable for your window. Taking these 7 measurements however is a piece of cake. We simply need 3 width measurements, 3 height measurements & 1 depth measurement. Follow the step by step instructions in the video below & you can't go wrong!

  • How do I fit my Total Blackout Cassetted Blinds?View moreView less
  • Fitting one of our Total Blackout Blinds is a doddle as it doesn't require drilling & can be installed simply with a hammer & screwdriver! The video below shows you step by step how to fit your new blind.

  • How easy is it to fit my blinds?View moreView less
  • Generally speaking fitting window blinds is very easy. Depending on the type and size of the product you will have a number of brackets which are simply screwed into your recess or wall which the blind fits into. For product specific instructions and step by step guides please visit our fitting pages here – Fitting Guide

  • Can I change the control side on my roller blind?View moreView less
  • Sure, no problem at all. Simply remove the blind from its brackets (if it is already installed), pull the entire control mechanism out of one side of the roller blind tube, pull the entire pin out out of the opposite end & then reinsert them in the opposite ends. Your brackets may only marry to one of the ends, so if you've already fitted your blind you may need to swap the brackets to the opposite ends too.

  • Are your blackout blinds really blackout?View moreView less
  • Completely. We offer proper 3 pass blackout fabrics which offer complete light reduction. Being a roller blind you will have a small amount of light coming in around the sides unless you opt for a Total Blackout Cassette Roller Blind.

  • Are your blinds child safe?View moreView less
  • Yes, all of our blinds are child safe. We are proud members of the Make It Safe campaign launched by the British Blind & Shutter Association (BBSA) in 2009 to campaign for safer blinds. As a result of legislation introduced in early 2014, the blind industry has altered its products to ensure that any blind featuring a hazardous looped cord is supplied with a child safety device. This device keeps any looped cord tensioned at all times preventing strangulation. There are also restrictions on the length of the cord too. Depending on which type of blind you purchase, your blind will come with one of the following child safety devices:

    Each member of our Customer Care team is happy to answer any questions you may have regarding child safety, so if you would like to know more please Contact Us or visit the Make It Safe & BBSA websites.

  • I can't find the size code for my skylight window?View moreView less
  • No problem, we have written a guide explaining how to work out what size roof blind you need and thus which size to order. Please refer to it here – Identify My Skylight Window.

  • Do you offer free samples?View moreView less
  • Yes absolutely. Just fill in the samples request form here & select up to 5 samples you would like and we will post them out right away for you by Royal Mail First Class post!

  • My window is overlooked by and I need privacy whilst still allowing light inView moreView less
  • We have two ingenious solutions for this problem - Bottom Up Blinds & Day & Night Roller blinds.

  • Will the Perfect Fit System work with my windows?View moreView less
  • If you have a shallow frame depth then the Perfect Fit system will still fit your window. The smallest bracket available on this system is 18mm deep. If your depth is smaller than this, your Perfect Fit frame will protrude further into your room than your window frame leaving a small gap between the two ie. if your frame depth is 15mm, you will have a gap of 3mm between the Perfect Fit frame & your window frame (18mm - 15mm = 3mm). To prevent light leaking through this gap, fit draught excluder tape at the edges of the underside of the Perfect Fit frame to fill the gap. The area that will be affected is highlighted in the image below:

    Draught excluder tape is available in various depths from most high street hardware & homeware stores.

  • My spring loaded roller blind won't roll back up by itselfView moreView less
  • In most instances this will be caused by there being no tension within the spring. This can occasionally happen in transit & is easily resolved by applying tension to the spring. You can do this yourself in a matter of minutes. Instructions can be found here. Please refer to the section titled "Lost Tension on the Spring". If adding tension to the spring does not resolve this issue then please contact our Customer Care to troubleshoot further.

  • I cant find what I need. Can you help?View moreView less
  • We are always happy to help. Our customer care team will always offer honest, helpful advice & where possible provide suitable solutions to your problem. Just get in touch via our contact form, on the phone or drop us an email. All of our contact info can be found on our Contact Us page.

Contact

Free phone: 0800 1488229
Phone: 0115 9699933
Email: info@orderblinds.co.uk

Postal Address:
Order Blinds Online Ltd
Unit 13, Longhedge Lane
Bottesford
Leicestershire
NG13 0BF

Company No: 07106076
VAT No: 142616921

© 2017 Order Blinds Online

Ecommerce solution by Etail Systems

Follow us:

Like us on Facebook
Follow us on Twitter
Follow us on Pinterest
Subscribe to us on YouTube