Order Blinds Online
View the contents of your secure shopping basket


Install your blinds in seconds with Grip Fit™

Grip Fit No Drill Roller Blinds

• Fit your blind in less than a minute with no tools required
• No damage to walls from drilling, nails or adhesives
• Ideal for bathrooms as there's no risk of cracking tiles

Grip Fit No Drill Blinds

106 Items found
1 2 3
White Stitched Stripe Daylight Grip Fit Roller Blind

White Stitched Stripe Daylight

On offer
Windsor Dark Grey Blackout Grip Fit Roller Blind

Windsor Dark Grey Blackout

On offer
Priority delivery available
1 2 3
Grip Fit No Drill Blinds Installation

Installing your blinds couldn’t be easier.

Once you have opened your blind, simply raise the cassette into your recess at an angle, level it out and flip the bracket levers down to lock in place. Now you can insert the blind into the cassette, slide out the bracket covers and operate your blind.

The system works using a specially developed rubber compound and a clever bracket system to push out on your recess with up to 60kg of force. This means you can be confident that the blind will last the test of time, a promise we back with a impressive 10 year guarantee.

Is my window suitable for Grip Fit™ Roller Blinds?

Is your recess solid?

Because the bracket system pushes out with up to 60kg of force your recess needs to be solid. We have tested a whole host of substrates including brick, tile, plaster board and wood which are all suitable. However if your recess will move when pushed for example if you have plasterboard with nothing behind it then your window won’t be suitable for grip fit™.

Is your recess deep enough?

The cassette is a total of 8cm deep, so your recess must be at least this deep to house the product.

Are your walls parallel?

The grip fit roller blind grips onto the side of your recess. As a result of this your walls need to be parallel to each other and not taper forward or back where you are going to install the blind as this would stop the rubber compound from making contact with the wall fully.

How to measure for Grip Fit™ roller blinds:

It is important to use a steel tape measure as fabric tapes can stretch over time.

  1. Measure the depth of your recess. It needs to be at least 8cm deep to accommodate the Grip Fit cassette.
  2. Check the walls are solid by pushing on them with your hand. If the walls don’t move or bend when you push then they are suitable.
  3. Measure the width of your recess at the top of the window. It is important to measure to the nearest mm and in the area where you'll be installing the cassette, i.e. at the front or at the the back of the recess. Remember to allow room for your window handle if you have one.
  4. Measure the drop of the window in three places and note down the longest drop.

Over 250,000 Blinds Shipped

You Can Trust In Us For A Hassle-Free Experience With Quick And Easy Ordering, Fast Delivery And Professional Customer Care.

Follow our instagram @orderblinds

Beautiful made to measure window blinds

Sign up to our newsletter

and receive up to £50 off your order!

Join us and never miss out!

Receive limited time offers, VIP updates & new product sneak peaks straight to your inbox

  • Company No: 07106076
  • VAT No: 142616921

© 2024 Order Blinds

Ecommerce solution by Etail Systems

Secured by SagePay
VISA Accepted
Mastercard Accepted
Pay by PayPal